Electrochemical Behavior of Sn/CuSn/C Composite Prepared by Using Pulsed Wire Explosion in Liquid Medium for Lithium-Ion Batteries.

Title Electrochemical Behavior of Sn/CuSn/C Composite Prepared by Using Pulsed Wire Explosion in Liquid Medium for Lithium-Ion Batteries.
Authors H.J. Lee; J.S. Choi; J.K. Ha; Y.J. Shim; J.H. Ahn; K.K. Cho
Journal J Nanosci Nanotechnol
DOI 10.1166/jnn.2018.15683
Abstract

Tin-based materials, due to their high theoretical capacity of 994 mAh g-1 are potential candidates which can substitute the commercialized graphite anodes (372 mAh g-1). However, practical usage of pure tin in Li-ion cells has been hampered by the tremendous volume expansion of more than 260% during the lithium insertion/extraction process, resulting in particle pulverization and electrical disconnection from the current collector. In order to overcome this shortcoming, Sn/Cu6Sn5/C composites in this work were prepared by using pulsed wire explosion in a liquid medium and subsequently in situ polymerization. For comparison, Sn/C composite without tin-copper chemical compounds are also fabricated under a similar process. The Sn/Cu6Sn5/C and Sn/C composites were used as anodes for lithium-ion batteries. The Sn/Cu6Sn5/C composite anode showed good cyclability (scalability) and was maintained up to a capacity of 430 mAh g-1 after 100 cycles at 1 C-rate. The rate capability of the Sn/Cu6Sn5/C composite anode also showed higher performance (280 mAh g-1) than that (200 mAh g-1) of Sn/C composite at the 5 C-rate.

Citation H.J. Lee; J.S. Choi; J.K. Ha; Y.J. Shim; J.H. Ahn; K.K. Cho.Electrochemical Behavior of Sn/CuSn/C Composite Prepared by Using Pulsed Wire Explosion in Liquid Medium for Lithium-Ion Batteries.. J Nanosci Nanotechnol. 2018;18(9):64556458. doi:10.1166/jnn.2018.15683

Related Elements

Copper

See more Copper products. Copper Bohr Model Copper (atomic symbol: Cu, atomic number: 29) is a Block D, Group 11, Period 4 element with an atomic weight of 63.546. The number of electrons in each of copper's shells is 2, 8, 18, 1 and its electron configuration is [Ar]3d10 4s1. The copper atom has a radius of 128 pm and a Van der Waals radius of 186 pm. Copper was first discovered by Early Man prior to 9000 BC. In its elemental form, copper has a reddish-orange metallic and lustrous appearance. Of all pure metals, only silver Elemental Copperhas a higher electrical conductivity. The origin of the word copper comes from the Latin word 'cuprium' which translates as "metal of Cyprus," as the Mediterranean island of Cyprus was known as an ancient source of mined copper..

Tin

Tin Bohr ModelSee more Tin products. Tin (atomic symbol: Sn, atomic number: 50) is a Block P, Group 14, Period 5 element with an atomic weight of 118.710. The number of electrons in each of tin's shells is 2, 8, 18, 18, 4 and its electron configuration is [Kr] 4d10 5s2 5p2. The tin atom has a radius of 140.5 pm and a Van der Waals radius of 217 pm.In its elemental form, tin has a silvery-gray metallic appearance. It is malleable, ductile and highly crystalline. High Purity (99.9999%) Tin (Sn) MetalTin has nine stable isotopes and 18 unstable isotopes. Under 3.72 degrees Kelvin, Tin becomes a superconductor. Applications for tin include soldering, plating, and such alloys as pewter. The first uses of tin can be dated to the Bronze Age around 3000 BC in which tin and copper were combined to make the alloy bronze. The origin of the word tin comes from the Latin word Stannum which translates to the Anglo-Saxon word tin. For more information on tin, including properties, safety data, research, and American Elements' catalog of tin products, visit the Tin element page.

Lithium

Lithium Bohr ModelSee more Lithium products. Lithium (atomic symbol: Li, atomic number: 3) is a Block S, Group 1, Period 2 element with an atomic weight of 6.94. The number of electrons in each of Lithium's shells is [2, 1] and its electron configuration is [He] 2s1. The lithium atom has a radius of 152 pm and a Van der Waals radius of 181 pm. Lithium was discovered by Johann Arvedson in 1817 and first isolated by William Thomas Brande in 1821. The origin of the name Lithium comes from the Greek wordlithose which means "stone." Lithium is a member of the alkali group of metals. It has the highest specific heat and electrochemical potential of any element on the period table and the lowest density of any elements that are solid at room temperature. Elemental LithiumCompared to other metals, it has one of the lowest boiling points. In its elemental form, lithium is soft enough to cut with a knife its silvery white appearance quickly darkens when exposed to air. Because of its high reactivity, elemental lithium does not occur in nature. Lithium is the key component of lithium-ion battery technology, which is becoming increasingly more prevalent in electronics.