Magnesium Rod
Mg
7439-95-4
7439-95-4
| Product | Product Code |
Order or Specifications |
99% Magnesium Rod |
MG-M-02-R
|
 |
99.9% Magnesium Rod |
MG-M-03-R
|
|
99.99% Magnesium Rod |
MG-M-04-R |
|
99.999% Magnesium Rod |
MG-M-05-R
|
|
American Elements specializes in producing high purity uniform shaped Magnesium Rod with the highest possible density 
and smallest possible average grain sizes for use in semiconductor, Chemical Vapor Deposition (CVD) and Physical Vapor Deposition (PVD) processes including Thermal and Electron Beam (E-Beam) Evaporation, Low Temperature Organic Evaporation, Atomic Layer Deposition (ALD), Metallic-Organic and Chemical Vapor Deposition (MOCVD). Our standard Rod sizes range from 1/8" x 1/8" to 1/4" x 1/4" and 3 mm diameter. We can also provide Rod outside this range and deposition materials for specific applications such as fuel cells and solar energy. Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation. American Elements specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. American Elements casts any of the rare earth metals and most other advanced materials into rod, bar or plate form, as well as other machined shapes and through other processes such as nanoparticles (See also application discussion at Nanotechnology Information and at Quantum Dots) and in the form of solutions and organometallics. We have a variety of standard sized rod molds.. See research below. We also produce Magnesium as powder, ingot, pieces, pellets, disc, granules, wire, and in compound forms, such as oxide. Other shapes are available by request.
and smallest possible average grain sizes for use in semiconductor, Chemical Vapor Deposition (CVD) and Physical Vapor Deposition (PVD) processes including Thermal and Electron Beam (E-Beam) Evaporation, Low Temperature Organic Evaporation, Atomic Layer Deposition (ALD), Metallic-Organic and Chemical Vapor Deposition (MOCVD). Our standard Rod sizes range from 1/8" x 1/8" to 1/4" x 1/4" and 3 mm diameter. We can also provide Rod outside this range and deposition materials for specific applications such as fuel cells and solar energy. Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation. American Elements specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. American Elements casts any of the rare earth metals and most other advanced materials into rod, bar or plate form, as well as other machined shapes and through other processes such as nanoparticles (See also application discussion at Nanotechnology Information and at Quantum Dots) and in the form of solutions and organometallics. We have a variety of standard sized rod molds.. See research below. We also produce Magnesium as powder, ingot, pieces, pellets, disc, granules, wire, and in compound forms, such as oxide. Other shapes are available by request.
Magnesium is a Block S, Group 2, Period 3 element. The electronic configuration is [Ne] 3s2. In its elemental form magnesium's CAS number is 7439-95-4. The magnesium atom has a radius of 159.9.pm and it's Van der Waals radius is 173.pm.
| Formula | CAS No. | Appearance | Molecular Weight | Density | Melting Point | Boiling Point |
| Mg | 7439-95-4 | Gray | 24.31 | 1738 kg/m³ | 650 °C | 1090 °C |
| PRODUCT CATALOG | Submicron & Nanopowder | Tolling | Ultra High Purity | Sputtering Target | Crystal Growth | Rod, Plate, Powder, etc. |
© 2001-2007. American Elements is a U.S. Registered Trademark. All rights reserved.
This website and all pages, designs, concepts, logos, and color schemes herein are
the copyrighted proprietary rights and intellectual property of American Elements.
This website and all pages, designs, concepts, logos, and color schemes herein are
the copyrighted proprietary rights and intellectual property of American Elements.
