Products |
|
| Lanthanum Strontium Ferrite | |
| Lanthanum Strontium Manganite | |
| Lanthanum Strontium Cobalt Ferrite | |
| Lanthanum Strontium Magnesium Gallate | |
| Strontium Bromide | |
Strontium information, including Technical Data, Safety Data and its properties, research, applications and other useful facts are discussed below. Scientific facts such as the atomic structure, ionization energy, abundance on Earth, conductivity and thermal properties are included.
Strontium has low tech applications as an additive to flares and pyrotechnics because of the bright crimson flame produced by its salts. Strontium is available as metal and compounds with purities from 99% to 99.999% (ACS grade to ultra-high purity); metals in the form of foil, sputtering target, and rod, and compounds as submicron and nanopowder. It also has many high technology applications because of its high refractive index as a titanate in glass, as a "getter" in electron tubes and as a dopant for numerous perovskite formulations to produce cathodes for oxygen generation or solid oxide fuel cells. Historically the primary use of strontium was to produce CRT glass for color television and computer tubes. Strontium facts, including appearance, CAS #, and molecular formula and safety data, research and properties are
Oxides are available in forms including powders and dense pellets for such uses as optical coating and thin film applications. Oxides tend to be insoluble. Fluorides are another insoluble form for uses in which oxygen is undesirable such as metallurgy, chemical and physical vapor deposition and in some optical coatings. Strontium is available in soluble forms including chlorides, nitrates and acetates. These compounds are also manufactured as solutions at specified stoichiometries. Strontium is a Block S, Group 2, Period 5 element. The electronic configuration is [Kr] 5s2. In its elemental form strontium's CAS number is 7440-24-6. The strontium atom has a radius of 215.1.pm and it's Van der Waals radius is 200.pm.All elemental metals, compounds and solutions may be synthesized in ultra high purity (e.g. 99.999%) for laboratory standards, advanced electronic, metallurgy and optical materials and other high technology advantages. Information is provided for stable (non-radioactive) isotopes. Organo-Metallic Strontium compounds are soluble in organic or non-aqueous solvents. See Analytical Services for information on available certified chemical and physical analysis techniques including MS-ICP, X-Ray Diffraction, PSD and Surface Area (BET) analysis. Strontium was first discovered by A. Crawford in 1790.
Abundance. The following table shows the abundance of strontium and each of its naturally occurring isotopes on Earth along with the atomic mass for each isotope. |
Strontium
Strontium
stronzio
Estrôncio
estroncio
Strontium
Isotope |
Atomic Mass |
% Abundance on Earth |
Sr-84 |
83.913425 |
0.56 |
Sr-86 |
85.909262 |
9.86 |
Sr-87 |
86.908879 |
7.00 |
Sr-88 |
87.905614 |
82.58 |
Safety Data. The safety data for strontium metal, nanoparticles and its compounds can vary widely depending on the form. For potential hazard information, toxicity, and road, sea and air transportation limitations, such as DOT Hazard Class, DOT Number, EU Number, NFPA Health rating and RTECS Class, please see the specific material or compound referenced in the left margin.
Ionization Energy. The ionization energy for strontium (the least required energy to release a single electron from the atom in it's ground state in the gas phase) is stated in the following table: |
1st Ionization Energy |
549.48 kJ mol-1 |
2nd Ionization Energy |
1064.25 kJ mol-1 |
3rd Ionization Energy |
4138.29 kJ mol-1 |
Conductivity. As to strontium's electrical and thermal conductivity, the electrical conductivity measured as to electrical resistivity @ 20 ºC is 23 μΩcm and its electronegativities (or its ability to draw electrons relative to other elements) is 0.95. The thermal conductivity of strontium is 49 W m-1 K-1.
Thermal Properties. The melting point and boiling point for strontium are stated below. The following chart sets forth the heat of fusion, heat of vaporization and heat of atomization. |
Heat of Fusion |
9.16 kJ mol-1 |
Heat of Vaporization |
154.4 kJ mol-1 |
Heat of Atomization |
164.4 kJ mol-1 |
| Formula | Atomic Number | Molecular Weight | Electronegativity (Pauling) | Density | Melting Point | Boiling Point |
Vanderwaals radius |
Ionic radius | Energy of first ionization |
| Sr | 38 | 87.62 g.mol -1 | 1.0 | 2.6 g.cm-3 at 20 °C | 769 °C | 1384 °C | 200.pm | 0.113 nm (+2) | 549.48 kJ.mol-1 |
| PRODUCT CATALOG | UK Operations | Submicron & Nanopowder | Tolling | Ultra High Purity | Sputtering Target | Crystal Growth | Rod, Plate, Powder, etc. | Foil |
This website and all pages, designs, concepts, logos, and color schemes herein are
the copyrighted proprietary rights and intellectual property of American Elements.
